![]() ![]() The cable from the newly installed continuous light switch must be routed to the motion detector. If both switches are now connected in parallel, the closed switch will always override the open switch. The output of a motion detector is also a simple switch with the same functionality. ![]() In principle, a simple light switch has two contacts which interrupt the current flow in the off state and pass it through in the on state. The following sections should be carefully read before installing the light switch. With an additional light switch, the connected outdoor light can then be switched to permanent light. Many motion detectors can be bypassed with little effort. In order to prevent constant switching on and off, many motion detectors can be bypassed and switched to permanent light if necessary. These are only three of the most common disadvantages. Light always goes on and off at garden parties.No permanent light when unloading the car.For some environments this is sufficient, but in other situations there are also disadvantages: With most models, the response threshold and the light duration of the connected LED lamp can be set. This eliminates the need to switch the lighting on and off manually every day in the dark. Motion detectors are often used for outdoor luminaires at home or in the garden. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |